Path: Top > Tugas Akhir - D3 > 2017 > Jurusan Teknik Mesin > Program Studi Teknik Mesin > 2019

Pembuatan Mesin untuk Meluruskan dan Memotong Kawat Gulungan dengan Diameter 3 mm

Manufacturing of a Machine for Straightening and Cutting Roll Wire with a Diameter 3 mm

Tugas Akhir, 030 / 2019 / TME
Undergraduate Theses from JBPTPPOLBAN / 2020-04-14 15:18:05
By : Aris Setiawan - 161211036 (aris.barmex1234@gmail.com )
Created : 2020-04-14, with 4 files

Keyword : Straightener, Cutter, Chicken Coop.
Subject : Pelurus, Pemotong, Kandang Ayam.

Kebutuhan terhadap bahan baku kawat untuk produk rumah tangga cukup tinggi, salah satunya pada perusahaan berskala kecil menengah yang memproduksi kendang ayam. Setiap harinya mereka membutuhkan sekitar 150 kg bahan baku kawat. Mereka mengolah kawat melalui beberapa tahapan, yaitu dimulai dari pelurusan hingga pemotongan kawat. Akan tetapi, pada proses pelurusan dan pemotongan kawat perusahaan berskala kecil menengah tidak dapat memenuhi besarnya permintaan konsumen. Hal ini dikarenakan proses pelurusan yang dilakukan saat ini masih manual, sehingga bagi industri manufaktur atau perusahaan berskala kecil menengah mengalami kesulitan dalam proses produksi. Untuk mengatasi masalah tersebut diperlukan mesin untuk meluruskan dan memotong kawat gulungan diameter 3 mm, dengan prinsip kerjanya adalah gulungan kawat yang akan di luruskan dan dipotong, dimasukan kedalam lubang pengarah. Kemudian dihubungkan kedalam roll utama untuk proses pelurusan kawat, selanjutnya masuk ke proses pemotongan menggunakan pisau dengan hasil ukuran kawat yang disesuaikan dengan kebutuhan kontruksi kandang ayam. Proses pelurusan kawat terdapat penyimpangan pada ukuran kawat yang dihasilkan, yaitu kawat tidak lurus. Sehingga diperlukan adanya penyempurnaan pada bagian pelurusan kawat agar dapat menunjang proses pengelasan titik kontruksi kandang ayam sesuai yang dibutuhkan.

Description Alternative :

The need for wire raw materials for household products is quite high, one of them is in small and medium scale companies that produce chicken drums. Every day they need around 150 kg of wire raw material. They process the wire through several stages, starting from straightening to cutting the wire. However, in the process of straightening and cutting wire, small and medium scale companies cannot meet the high demand of consumers. This is because the alignment process currently carried out is still manual, so that for manufacturing industries or small and medium scale companies experiencing difficulties in the production process. To overcome this problem, a machine is required to straighten and cut the 3mm diameter wire reel, with the working principle being a wire coil which will be straightened and cut, inserted into the guide hole. Then it is connected into the main roll for the wire straightening process, then entered into the cutting process using a knife with the results of the wire size adjusted to the needs of the chicken coop construction. After going through the process of making straightening machines and wire cutters, the results obtained are that the machine was successfully worked, but there are obstacles in the process of wire straightening. Where the results of wire straightening experience irregularities that affect the expected wire size as needed. So it is necessary to improve the making of straightening machines and wire cutters in order to support the construction of the chicken coop needed.

Give Comment ?#(0) | Bookmark

PropertyValue
Publisher IDJBPTPPOLBAN
Organization
Contact NameHelmi Purwanti
AddressJl. Trsn. Gegerkalong Hilir Ds. Ciwaruga
CityBandung
RegionJawa Barat
CountryIndonesia
Phone022 201 3789 ext. 168, 169, 239
Fax022 201 3889
Administrator E-mailhelmi.purwanti@polban.ac.id
CKO E-mailhelmi.purwanti@polban.ac.id

Print ...

Contributor...

  • Pembimbing 1: Aris Suryadi, S.T., M.T.


    Pembimbing 2: Rudy Y. Widiatmoko, B.Eng., M.Sc., Editor: Muhammad Abdillah Islamy, S.Pd

Downnload...